Posts

Showing posts from December, 2011

Jacket update

Image

Leafy green jacket (well, beginnings of!)

Image
I've started working on Evie's (=DollZone Kimi) jacket first of all because I have a clear idea of how I want it to look and then I'll be developing the rest of the outfit around that. Might be a bit of a backwards way of doing it, but in a way I quite enjoy the experimental aspect of doing it this way rather than just replicating a fixed design idea.  The plan is to make a jacket with tails that has varied stripes of green to make it look quite leafy. So, I'm using this pattern cutting book which I got ages ago and I converted all the sizing down to fit this MSD size dolly. Scaling down from size 12 measurements by dividing them all by a scale factor of 5 seems to have done the trick to fit her.  I then cut a toile out of thin vilene and sewed in all the darts according to the pattern. And these are some of the fabrics I'll be using, and here's a rough idea of what the leafy 'tails' will hopefully look like:  Just testing out

Welcome home DollZone Kimi!

Image
 Here is my new little beauty, my first proper BJD! She is a resin, MSD size dolly with double joints (which I'm liking a lot). Before she even arrived I started making a wig for her, so that she wouldn't be completely naked for so long. It came out quite well, I followed the same method as detailed in my post from April this year, with a slight difference. On my Hujoo Berry's wig I was using Alpaca wool fibre for the hair, whereas this time I decided to try synthetic Kanekalon hair used by hairdressers for wigs and hair pieces. As well as preparing the strips of hair by gluing the ends, this time I glued them onto strips of very thin vilene and I also sewed across them once dried for extra hold. I then sewed these strips to the wig cap as below:   So as you can sort of see I started at the bottom on the back of the wig cap and worked my way up and around the head, sewing each of the strips of hair to the cap. I did take quite a bit longer of cours

Say hello to my little friend!

Image
It's been a long old while since I last posted anything, but you know how it is ;) But that doesn't mean I haven't been busy! In fact, I finally finished my little handmade ball jointed goblin. Take a look! Unfortunately these were taken on my old camera so they're not the most brilliant photos, but I just wanted to get a couple of snaps up. And I was chuffed that I finally finished him! On my Doll Making page you can see the beginnings of the process, which followed the Ryo Yoshida method, using LaDoll Premix. Once I'd done a lot of sanding I applied a waterproofing agent to seal the paper clay and then painted in acrylic on top. The body blushing was done using pastels and then all the pieces were sprayed using a Matt Varnish. Then all was strung together using elastic and Voila! - a cheeky, lil green gobbo is born. Now all he needs is a sweet little outfit. He is going to be a little friend for my new BJD - DollZone Kimi - who I got fo